 |
 | |  |
EZ-Connection Splitters for EL Wire
This handy tool will allow you to run multiple strands of e-z connection el wire from the same inverter. Just remember not to exceed the total footage of el wire that the inverter is rated for.
| | EZ-Connector
Includes one male and one female connector with leads.
|
|
|
 | |  |
Heat shrink tube
HEAT SHRINK TUBING Dont forget the shrink tube! Sold by the foot. 1/8" is great for the 2.3mm wire, 3/16 for the 3.2mm, and 1/4" for the 5mm wire. Just heat it up with a heat gun or other heat source and it will shrink down to protect your solder joint.
| | EZ Connector extension
A female EZ-connect on one end, and a male EZ-connect on the other for easy extension of any EL Wire connection. (Not for use with CCFL products)
|
|
|
 | |  |
Soldering Iron
This 25 watt soldering iron is perfect for working with el wire. Has a very fine tip for precision work and will not over heat your el wire.
| | "AA" Battery
|
|
|
 | |  |
9 volt tabs
| | Lighter adapters w/ 3 foot lead wire
|
|
|
 | |  |
Lighter adapters
Fused cigarrete adapters with red led. Works great with any of our 12v EL Wire, or Cold Cathode Inverters.
| | 9 volt baterries
These are very high quality Energizer industrial 9 volt batteries (or equivilant).
|
|
|
 | |  |
5 Foot Section of Rosin Core Solder
5 Feet of Rosin Core solder. No flux needed.
| | SOLDER CHARGE
If you do not want to do any soldering we can do it for you. Please include 1 solder charge for each connection that you would like us to make. You can use the message field upon checkout to describe exactly what you would like to have done (detailed instructions are appreciated so that we can make sure that you get exactly what you want).
|
|
|
 | |  |
Solder Wick
Copper mesh solder wick, great for desoldering.
| | 12v Battery Holder (8AA)
Perfect for any of our 12v inverters for portable cold cathode and el wire applications.
|
|
|
 | |  |
Lead Wire (By the foot)
Lead wire for extending your connections. Sold by the foot.
| | Dimmer Switch
Adjustable dim control for ac adapters on your home kits or other el wire projects... Dim's from full off to full power. Great for EL Wire, but not to be used with our Cold Cathode products.
|
|
|
 | |  |
Rocker and Molex Switch
Rocker and Molex power connector with passthrough for easy computer installation of any of our EL Wire or Cold Cathode kits.
| | 12 volt 500 mA a/c adapter
perfect for use with any of our 12 volt inverters including the mini 12 volt, the 1-40 foot 12 volt and the 50 - 125 foot inverter.
|
|
|
 |
Cold Cathode installation kit
Kit comes with all screws and mounting clips necesary to install any of our dual cold cathode kits. Includes mounting clips and screws for (2)bulbs and inverter. Perfect for auto and other vehicle installations.
|
|